HP X1000, nx7000 manual Disconnect the SD Card slot board cable 1 from the system board

Models: X1000

1 174
Download 174 pages 49.84 Kb
Page 119
Image 119
2.Disconnect the SD Card slot board cable 1 from the system board.

Removal and Replacement Procedures

2.Disconnect the SD Card slot board cable 1 from the system board.

3.Remove the PM2.5×5.0 screw 2 that secures the SD Card slot board to the notebook.

4.Remove the PM2.5×5.0 screw 3 that secures the SD Card slot board cable ground loop to the notebook.

5.Remove the SD Card slot board and cable.

Removing the SD Card Slot Board and Cable

Reverse the above procedure to install the SD Card slot board and cable.

5–36

Maintenance and Service Guide

Page 119
Image 119
HP X1000, nx7000 manual Disconnect the SD Card slot board cable 1 from the system board