HP nx7000, X1000 manual Removing the Hard Drive from the Hard Drive Cover

Removal and Replacement Procedures

e.Remove the four PM2.5×3.5 screws 1 that secure the hard drive to the hard drive cover and shield.

f.Remove the hard drive shield 2 and connector 3 from the hard drive.

g.Separate the hard drive from the hard drive cover 4.

Removing the Hard Drive from the Hard Drive Cover

ÄCAUTION: The hard drive cover should only be removed if it is damaged and must be replaced. Unnecessarily removing the cover can result in damage to the cover and hard drive and loss of information.

✎The hard drive cover, shield, and connector are included with the hard drive and also in the Miscellaneous Plastics Kits, spare part number 338133-001 for HP Compaq nx7000 models, and spare part number 337009-001 for Compaq Presario X1000 models.

Reverse the above procedure to install the hard drive.

Maintenance and Service Guide 5–7