lower fuser temperature, such as transparencies or light media.
Wrinkles or creases
● Make sure that media is loaded properly. ● Check the media type and quality.
● Open the
● Turn over the stack of media in the tray. Also, try rotating the media 180° in the input tray.
● For envelopes, this can be caused by air pockets inside the envelope. Remove the envelope, flatten the envelope, and try printing again.
Toner scatter outline
● If large amounts of toner have scattered around the characters, the media might be resisting the toner. (A small amount of toner scatter is normal for laser printing.) Try a different media type.
● Turn over the stack of media in the tray.
● Use media that is designed for laser printers.
ENWW | Improve print quality 85 |
