HP P2010 manual Connect the printer to the network, 10/100Base-TX Networking options

10/100Base-TX Networking options

●HP Jetdirect en3700

●HP Jetdirect 175x

●HP Jetdirect ew2400

To order the print server, see 10/100 networking print servers on page 98.

Connect the printer to the network

To connect a networking-equipped product, you need the following items:

●Functional wired network

●CAT-5 Ethernet cable

To connect the printer to your network, perform the following steps:

1.Connect the CAT-5 Ethernet cable to an available port on the Ethernet hub or router.

2.Connect the Ethernet cable to the Ethernet port on the back of the printer.

3.Verify that one of the network lights (10 or 100) is illuminated on the network port located on the back of the printer.

4.Confirm that the product has been assigned an IP address by printing a Configuration page: When the printer is in the Ready state, press and hold the Go button for 5 seconds.

NOTE: To resolve network connection problems, see Network-setupproblem-solving on page 94.

Install the printer software for the network printer

To use the printer on the network, install the printer software on a computer that is connected to the network.

ENWW Printer connections 9