b.If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket (1) then away from the inside of the chassis to release it from the chassis frame (2). Be sure not to scrape the card against the other components.

NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card.

Figure 7-11Removing a PCI Express x1 Expansion Card

60 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

Page 68
Image 68
HP Pro 4300 manual