Removing an Internal 5.25-inch Drive

CAUTION: All removable media should be taken out of a drive before removing the drive from the computer.

To remove a 5.25-inch internal drive:

1.Prepare the computer for disassembly (Preparation for Disassembly on page 48).

2.Remove the access panel (Computer Access Panel on page 50).

3.Rotate the drive cage to its upright position (1) and remove the mounting screw on the back left side of the drive (2).

Figure 7-17Removing the Drive Mounting Screw

4.Press and hold down the latch to disconnect the power cable (1) and data cable (2) from the rear of the optical drive.

Figure 7-18Disconnecting the Power and Data Cables

68 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

Page 76
Image 76
HP Pro 4300 manual Removing an Internal 5.25-inch Drive