7.If installing a media card reader, connect the USB cable from the media card reader to the USB connector on the system board labeled MEDIA1.

Figure 7-34Connecting the Media Card Reader USB Cable

NOTE: Refer to System Board Connections on page 53 for an illustration of the system board drive connectors.

8.Replace the 5.25-inch drive.

9.Replace the access panel.

10.If the computer was on a stand, replace the stand.

11.Reconnect the power cord and turn on the computer.

12.Lock any security devices that were disengaged when the access panel was removed. The system automatically recognizes the drive and reconfigures the computer.

76 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

Page 84
Image 84
HP Pro 4300 manual