Copyright information
© 2007 Copyright
Edition 1, 10/2007
Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Copyright (C)
License to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc. MD4
License is also granted to make and use derivative works provided that such works are identified as "derived from the RSA Data Security, Inc. MD4
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty of any kind.
These notices must be retained in any copies of any part of this documentation and/or software.
Trademarks
Intel®, Pentium® is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
Microsoft®, Windows®, Windows® XP, and Windows® Vista are U.S. registered trademarks of Microsoft Corporation.
Safety information
Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock.
1.Read and understand all instructions in the documentation that comes with the HP Printer.
2.Use only a grounded electrical outlet when connecting this product to a power source. If you do not know whether the outlet is grounded, check with a qualified electrician.
3.Observe all warnings and instructions marked on the product.
4.Unplug this product from wall outlets before cleaning.
5.Do not install or use this product near water, or when you are wet.
6.Install the product securely on a stable surface.
7.Install the product in a protected location where no one can step on or trip over the line cord, and the line cord cannot be damaged.
8.If the product does not operate normally, see Maintain and troubleshoot.
9.There are no
