Menu item |
Tray Lock | Tray 1 |
| Tray 2 |
| Tray 3 |
| None* |
Tray Lock is a feature that “locks" a tray so that the only time the printer will draw from that tray is when it is specifically requested. This is useful when putting special paper in a tray, such as letterhead. If using “Automatically Select" for the paper source and Tray 1 is locked, the printer will only draw from the remaining trays, either Tray 2 or optional Tray 3, if it is installed. Printing can still be done from the locked tray, but the source must be specified. Tray 1 lock may be overridden under certain conditions.
Duplex | On | Bind on Long | Selects whether to turn duplexing on or off. If on, |
|
| Edge | select to have the page indented on the long edge or |
|
| Bind on Short | short edge of the paper for binding. |
|
|
| |
|
| Edge |
|
|
|
|
|
| Off |
|
|
Ink Low Warning Automatic
Level
Custom
Determines when the Low Ink warning message appears on the control panel. Choose Custom to select a cartridge color and ink level value from
Power Handling | Standby | 5 Minutes | Determines when to put the product in Standby mode. | |
|
| 10 | Minutes * |
|
|
| 15 | Minutes |
|
|
| 30 | Minutes |
|
|
| 1 Hour |
| |
|
|
|
|
|
| Sleep After | 15 | Minutes | Determines when to put the product to sleep after it |
| Standby | 30 | Minutes | has been put into Standby mode. |
|
|
| ||
|
| 1 Hour |
| |
|
| 2 Hours * |
| |
|
|
|
| |
| Auto Power Off | Never* | Sets the product to power down after a specific | |
| (HP Officejet Pro | 2 hours after | amount of time. | |
| X451 MFP Series) |
| ||
| Standby |
| ||
|
|
| ||
|
| 4 hours after |
| |
|
| Standby |
| |
|
| 8 hours after |
| |
|
| Standby |
| |
|
| 12 hours after |
| |
|
| Standby |
| |
|
|
|
| |
| Schedule On/Off | Schedule On | Schedules a time to automatically turn the product on | |
|
| Schedule Off | or off. | |
|
|
| ||
|
|
|
|
|
24 | Chapter 2 Control panel menus | ENWW |