4.When the software prompts you, connect the USB cable to the computer and the product.

5.When the installation is complete, print a page from any program to make sure that the printing software is correctly installed.

Connect the product to a network

Supported network protocols

To connect a networking-equipped product to a network, you need a network that uses one or more of the following protocols.

●TCP/IP (IPv4 or IPv6)

NOTE: While this product can be used over IPv6 networks, a product software installation from the CD is not supported over IPv6 networks.

●LPD Printing

●SLP

●WS-Discovery

●HP Wireless Direct

Install the product on a wired network

Use this procedure to install the product on a wired network.

30

Chapter 3 Connect the product

ENWW