Installing a Print Cartridge
1 | With the control panel and top cover open,Openlocatethe print cartridge box and container, th | |||
|
| 2 |
| |
| the print cartridge cradle inside the HP OfficeJetgrasphe print cartridge by the green top and | |||
| Series 300, near on the right side. | the cartridge from the container.bothGently remo | ||
|
|
| pieces of tape – blue and white – covering the ink | |
|
|
| nozzles and vent. hole | |
|
|
| CAUTIONS: | 1) If the user doesn’t remove the whit |
|
|
| tape, the cartridge will prematurely fail. | |
|
|
| ||
2) Be careful not to touch the ink nozzles or th
Print cartridge cradle
copper contacts. Fingerprints may damage the
| SL42A | SL16 | Remove bothpieces of tape! | |
|
|
| ||
3 | Place the print cartridge down into the cradlePushtheasgreen arrow toward the green dot u | |||
| 4 |
|
| |
| shown. Align the green arrow on the cartridgethecartridgesnapsinto place. | |||
| top with the green dot on top of the cradle. |
|
| |
| SL42 | SL43 |
5 | Close the top cover, then close the control panel. | |
| Helpful Hint: | |
|
| Be sure to close the control panel firmly, until it |
|
| snaps into place. |
SL18A
Installation and
