Special Menus and Functions
Special menus and various functions can be accessed through multiple (simultaneous) butt on the HP OfficeJet Series 300. These button combinations should be held prior to and during po display readsSelf“ Test Please”.WaitMost of these functions can also be accessed through the Servic menus described later in this section. Using these functions should be limited to only ac Factory menus, for transferring the settings of one HP OfficeJet Series 300 to another, and f values.
Refer to the following table for accessing the special menus and functions.
Special Menus and Functions
Buttons to be | pressedMenu/Function accessed | Use |
| |
|
|
|
|
|
* | and7 | Menus access | Accesses 3 menus: Service and Factory, | |
|
|
| Regulatory Settings and Underware. Only | |
|
|
| the Service and Factory menus should be | |
|
|
| accessed by persons other than HP | |
|
|
| authorized repair center personnel. | |
|
|
|
|
|
4 | and7 | Local Receive | Used when copying or transferring the u | |
|
|
| settings from one HP OfficeJet Series 300 | |
|
|
| to another HP OfficeJet Series 300 locally. | |
|
|
| The two HP OfficeJet Series 300s are | |
|
|
| connected by a common phone cord | |
|
|
| between each LINE telephone connection. | |
|
|
| This HP OfficeJet Series 300 will be cloned | |
|
|
| to the other since this one is set to recei | |
|
|
| the data. The data transfer is | |
|
|
| automatic. It does not matter which HP | |
|
|
| OfficeJet Series 300 is powered on first. | |
|
|
|
|
|
4 | and1 | Local Send | Used when copying or transferring the u | |
|
|
| settings from one HP OfficeJet Series 300 | |
|
|
| to another HP OfficeJet Series 300 locally. | |
|
|
| The two HP OfficeJet Series 300s are | |
|
|
| connected by a common phone cord | |
|
|
| between each LINE telephone connection. | |
|
|
| The other HP OfficeJet Series 300 will be | |
|
|
| cloned to this one since this one is set to | |
|
|
| send the data. The data transfer is | |
|
|
| automatic. It does not matter which HP | |
|
|
| OfficeJet Series 300 is powered on first. | |
|
|
|
|
|
* | and1 | Full Reset | Will reset all settings and user menu set | |
|
|
| items to factory default settings except | |
|
|
| parameter 200 (scanner calibration) unles | |
|
|
| this value is out of range. Header, speed | |
|
|
| dial numbers, etc. will be erased. | |
|
|
|
|
|
* | and4 | Partial Reset | Will reset most user menu setup items | |
|
|
| except for header name and number, spee | |
|
|
| dial numbers, journal entries, broadcast | |
|
|
| header and numbers, and the Mercury | |
|
|
| number (U.K. only). Parameters 1 through | |
|
|
| 127, 155, 175 through 179, 200, 201, and | |
|
|
| 226 through 229 are not reset. | |
|
|
|
|
|
Problem
