Loading Envelopes in the Input (Paper) Tray
1 | Pull the input tray out until it is fully extendedLoadup to. 20 envelopes flap up, with the | |
2 | top edge aligned to the right side of the | |
| The user can remove the output tray to facilitate | |
|
| HP OfficeJet Series 300, as shown. |
| envelope loading as shown in this procedure. Be | |
| sure to install the output tray before printing. | |
SL7 | SL8 |
|
3 | Slide the green paper guide until it snaps into | ||
| 4 | Install the output tray. If necessary refer t | |
| place at the appropriate envelope size setting. | ||
|
|
| “Installing an Output Tray” earlier in this |
| The envelope guide will pop up to keep the | ||
|
|
| chapter. |
| envelopes vertically aligned. Install the output | ||
| tray if not already installed. |
| Helpful Hints: |
|
|
| Do not force the input tray all the way in w |
|
|
| closing it. The envelopes must not buckle or |
|
|
| paper jam could occur. |
An “out of fax paper” error will display on th front panel card of the HP OfficeJet Manager, it is open. Although the device is unable to d tect the presence of envelopes even when pr erly loaded, it will print them.
|
| The following table lists the two allowabl |
|
| envelope sizes. Note that copies cannot be |
|
| made and faxes cannot be received on any |
| Paper Guide | envelopes. Be sure to set the paper size in the |
| menu to envelopes before printing. | |
|
| |
| U.S. No. 10 | Description Size |
|
| |
| envelope | U.S. No. 10 |
SL9 | European DL | envelopes 9.5 x4.12 inches (241x105 mm) |
| envelope | European DL |
|
| |
|
| envelopes 8.66x4.33 inches (220x110mm) |
Installation and
