Setting Up for Faxing (Germany Installation)
The following types of installations are the ones recommended for use with the HP OfficeJet best
DReceive fax calls only – no voice calls, on a dedicated fax line
DReceive fax and voice calls at the same phone number – without an answering machin
DReceive fax and voice calls at the same phone number – with an answering machine
After selecting the best installation to meet the user needs, the correct reception mode information will need to be set up. The procedures to accomplish this are in the following in the HP OfficeJet Series 300 User’s Guide for the user’s model:
DSetting the Reception Mode for incoming calls
DSetting the number of rings to answer
DSelecting Tone or Pulse dialing
DEntering the Date and Time
DEntering the header information (company name and fax number)
The above operations can also be accomplished from the front panel as described earlier
Refer to the HP OfficeJet Series 300 User’s Guide for the user’s model to find out how to use in a
Using an HP OfficeJet Series 300 with the HP OfficeJet Series 300 Manager and Eclipse FAX SE to contro briefly described earlier in this section. Detailed information is provided in the HP OfficeJet S Reception mode in an HP OfficeJet Series 300 is set during installation of the software, but can b HP OfficeJet Series 300 Manager software by selecting the Receive Mode in the Receive Fax Setup described in the HP OfficeJet Series 300 User’s Guide for theRecuser’sptionmodelmodes. can also be changed fro
the front panel as described earlier in this chapter.
The types of installation recommended can be depicted in the same diagrams as shown o Installation consists of connecting the HP OfficeJet Series 300, telephone, and answering ma telephone wall jack as shown. Set the Receive Mode as specified in the HP OfficeJet Series 300 User user’s model.
