Installing Control Panel and One-Touch Overlays

Each HP OfficeJet Series 300 is shipped with a control panel overlay appropriate for the co installed. The overlay has the HP logo and HP Model 300, Model 330, or Model 350 name as well as the c button names printed on it. If an overlay needs to be installed, remove the protective cove and carefully position the overlay on the control panel. Then press the overlay into pla cover from the top of the overlay. The illustration below shows the overlay in place wit removed.

One-Touch Speed Dial

SL50A

Removing￿ the￿ Protective￿ Cover￿ from￿ the￿ Top￿ of￿ the￿ Control￿ Panel￿ Overlay

Each HP OfficeJet Series 300 is shipped with a One-Touch speed dial overlay and clear plastic pro overlay installed. If a new overlay and protective cover need to be installed, position t one-touchbuttons as shown below. Press the overlay into place. Then place the protective Insure that the tabs on the protective cover are properly seated.

Tab

Protective

Cover

Overlay

One-TouchButtons

FX-75

Placing￿ the￿ One￿Touch￿ Speed￿ Dial￿ Overlay￿ and￿ Protective￿ Cover￿ Over￿ the￿ One￿Touch￿ Panel

2-16Installation and Configuration