Link speed and duplex settings

NOTE: This information applies only to Ethernet networks. It does not apply to wireless networks.

The link speed and communication mode of the print server must match the network hub. For most situations, leave the product in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the product from communicating with other network devices. If you need to make changes, use the product control panel.

NOTE: The setting must match with the network product to which you are connecting (a network hub, switch, gateway, router, or computer).

NOTE: Making changes to these settings causes the product to turn off and then on. Make changes only when the product is idle.

1.From the control panel, press (X451 Series) or touch (X551 Series) the Setup button.

2.Press or touch the Network Setup menu item.

3.Press or touch the Advanced Setup menu item.

4.Press or touch the Link Speed menu.

5.Select one of the following options.

Setting

Description

 

 

Automatic

The print server automatically configures itself for the highest link speed and

 

 

 

communication mode allowed on the network.

 

 

 

10

Half

10 megabytes per second (Mbps), half-duplex operation

 

 

 

10

Full

10 Mbps, full-duplex operation

 

 

 

 

100

Full

100

Mbps, full-duplex operation

 

 

 

 

100

Half

100

Mbps, half-duplex operation

 

 

 

 

 

6.Press or touch the OK button. The product turns off and then on.

HP ePrint

With HP ePrint , you can print anywhere, anytime, from a mobile phone, laptop, or any other mobile device. HP ePrint works with any email-capable device. If you can e-mail, you can print to an

HP ePrint-enabled product. For more details, go to www.hpeprintcenter.com.

NOTE: The product must be connected to a network and have Internet access to use HP ePrint.

HP ePrint is disabled as a default setting in the product. Use this procedure to enable it.

1.Type the product IP address into the address line of a Web browser to open the HP Embedded Web Server.

2.Click the HP Web Services tab.

3.Select the option to enable Web Services.

34

Chapter 3 Connect the product

ENWW

Page 48
Image 48
HP Pro X X451dn CN459AB1H, Pro X X551dw Inkjet CV037AB1H HP ePrint, Link speed and duplex settings, Setting Description