Input power

The power information in this section may be helpful if you plan to travel internationally with the computer.

The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.

The computer can operate on DC power within the following specifications.

Input Power

Rating

 

 

Operating voltage and current

18.5 V dc @ 3.5 A – 65 W

 

19.5 V dc @ 3.33 A – 65 W

 

19 V dc @ 4.74 A – 90 W

 

19.5 V dc @ 4.62 A – 90 W

 

19.5Vdc @ 2.31A – 45W

 

 

NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not

exceeding 240 V rms.

NOTE: The computer operating voltage and current can be found on the system regulatory label.

92 Chapter 14 Specifications

ENWW

Page 102
Image 102
HP Rlve 810 G2 manual Input power, Input Power Rating