•Discover the application.
Adding Microsoft Exchange Domain Controller Access
To obtain information about your Microsoft Exchange servers, you must provide the user name and password for at least a primary domain controller, in addition to a DNS name, as described in the following steps.
IMPORTANT: The hosts should recognize the management server by name, as a reverse
To provide information about the Microsoft Exchange servers:
1.Do one of the following:
•Discovery HP SE - Select Tools > Storage Essentials > Home > Discovery > Setup. Then, click the Applications tab.
•Discovery HP SIM - Select Options > Protocol Settings > Storage Essentials > Global Application Discovery Settings.
The information you provide for the primary domain controller and backup domain controller apply to all Microsoft Exchange servers you discover.
2.In the Microsoft Exchange Configuration section, click the Edit button.
3.Under the Primary Domain Controller section, perform the following steps:
a.In the Host Name field, type the fully qualified DNS name for the domain controller.
b.In the User Name field, type the user name for accessing the Microsoft Exchange server.
c.In the Domain Password field, type the corresponding password for accessing the Microsoft Exchange server.
d.In the Verify Password field,
4.Under the Backup Domain Controller section, perform the following steps:
a.In the Host Name field, type the fully qualified DNS name for the domain controller.
b.In the User Name field, type the user name for accessing the Microsoft Exchange server.
c.In the Domain Password field, type the corresponding password for accessing the domain controller.
d.In the Verify Password field,
5.Click the OK button.
IMPORTANT: You must discover the host running Microsoft Exchange. See ”Step 3 - Discovering Applications” on page 116.
Deleting a Microsoft Exchange Domain Controller
To delete a Microsoft Exchange domain controller:
1.Do one of the following:
116 Discovering Applications, Backup Servers and Hosts