Figure 47 Multipathing Displayed in the Topology (Continued)
Keep in mind the following:
•If you do not see all of the elements in the path displayed, verify they have been discovered and details have been obtained from them. See ”Discovering Filers, Tape Libraries, Switches and Storage Systems” on page 15.
•See ”Known Device Issues” on page 628 for multipathing issues regarding certain devices.
•The management server displays only the active path for an RDAC host. It also displays only the active path when PowerPath is running on a host connected to a CLARiiON storage system. The management server also does not support RDAC configurations for monitoring disk statistics.
Direct Attached Storage
To view direct attach storage, you must enable the 
button. See Table 28 on page 220 for more information.
284 Viewing Element Topology and Properties