The new certificate is copied to the correct location.

Troubleshooting After Upgrading

This section provides information on troubleshooting after upgrading. It includes the following topics:

”SMI-S Switches Must Be Removed and Rediscovered After Upgrading” on page 609

SMI-S Switches Must Be Removed

and Rediscovered After Upgrading

You must remove and rediscover Cisco, QLogic, or CNT switches supported through SMI-S after you upgrade the management server. These additional steps vary according to whether you do discovery from HP SIM or HP SE.

IMPORTANT: Refer to the support matrix for information on which models and firmware revisions are supported through SMI-S.

HP SIM

1.To remove elements from the HP SIM database:

a.Click Systems in the left pane.

b.Select the elements you want to delete.

c.Click Delete.

2.Rediscover the Cisco, QLogic, or CNT switches in HP SIM. See ”Step 1 - Discover Switches” on page 31.

3.Perform Discovery Data Collection. See ”Step 4 - Discovery Data Collection or Get Details” on page 80.

HP SE

1.Remove the Cisco, QLogic, or CNT switches supported through SMI-S from HP SE. See ”Deleting Elements from the Product” on page 78.

2.Rediscover the Cisco, QLogic, or CNT switches in HP SE. See ”Step 1 - Discover Switches” on page 31.

3.Perform Get Details. See ”Step 4 - Discovery Data Collection or Get Details” on page 80.

Troubleshooting Discovery andDiscovery Data Collection/Get Details

This section describes the following:

•”Names are Changed After Running Discovery Data Collection/Get Details for Cisco SMI-S Switches” on page 610

•”Configuring E-mail Notification for Discovery Data Collection/Get Details” on page 610

•”Increasing the Time-out Period and Number of Retries for Switches in Progress” on page 611

Storage Essentials 5.00.01 User Guide 609