•in a shared network folder

•on an server with FTP capabilities

10.When you are asked if you want to upgrade, enter Yes.

11.After the firmware is loaded, reboot the switch.

Updating the Firmware With Modifying the Configuration File

You can enter the information for the firmware upgrade in the update_Brocade.conf file located in %JBOSS4_DIST%\server\appiq\remotescripts\automators.

1.Open the update_Brocade.conf file in a text editor, such as Notepad.

2.Acceptable fields are the following:

•switch_user - username for switch

•switch_pass - password for switch username

•ftp_server - IP address of FTP server with firmware file

•ftp_user - username for FTP server

•ftp_pass - password for FTP username

•firmware - absolute path to firmware file on FTP server

3.Assigned the following values. Verify the number sign (#) is removed from in front of the field. The program will prompt for these fields if they are not specified. All fields must be tab delimited.

switch_user admin

switch_pass switchpassword ftp_server 192.168.1.1 ftp_user root

ftp_pass password

firmware /myshare/firmware_directory/firmware_file where

•admin is the user name for the switch

•switchpassword is the password for the switch

•192.168.1.1 the IP address of the server that has the new firmware

•root is the user name of the server that has the new firmware

•password is the password of the server that has the new firmware

•/myshare/firmware_directory/firmware_file is the full path to the firmware file.

4.Save the update_Brocade.conf file.

5.Click Tools > Storage Essentials > Business Tools.

6.Select the switch you want to upgrade, and then click OK.

7.When you are asked if you want to upgrade the firmware, enter Yes.

8.After the firmware is updated, reboot the switch.

Setting up Risk Analysis

The risk analysis tools flag which HBAs and/or switches are a risk in your environment. The HBA Risk Analysis and Switch Risk Analysis determine which elements are at risk by checking them

596 Business Tools