Deleting Multiple Jobs

IMPORTANT: You cannot delete a job once it has started. A job has started if it has a state of

“started.” To delete jobs, select the jobs in the M column and then click the icon until all jobs have been removed, as shown in the following figure.

You can deselect jobs by clicking the check marks or by clicking the Clear Selection () button in the Provision Jobs pane.

Figure 60 Deleting Multiple Provisioning Jobs

Naming Conventions for Zones

The following are the naming conventions for zones:

Naming Conventions for Brocade Switches:

•The name must contain 1 to 64 characters.

•The name must begin with a letter. Any character other than the first character can be a letter, a number (0 to 9), or an underscore (_).

•The name is case sensitive. For example, “Zone1” and “zone1” are different zones.

•You cannot create a zone with the same name as an existing zone, zone alias or zone set. For example, if you create a zone named “new”, you cannot give a zone, zone alias, or zone set the same name.

•The following characters are invalid for Brocade switches: caret (^), dash (-), and dollar sign ($).

Naming Conventions for McDATA and Connectrix Switches:

•The name can have a maximum of 64 characters.

•The first character of a zone name must be a letter (A-Z, AZ).

•A zone name cannot contain spaces.

•Valid characters are a-a, AA, 0-9, caret (^), dash (-), underscore (_), and dollar sign ($).

•All names must be unique and may not differ by case. For example, myzone and MyZone are considered to be the same zone.

402 Path Provisioning