Discovery from HP SE
Instead of adding each IP address individually for scanning, the management server can detect a range of IP addresses, automatically populating the list of elements to be discovered.
Keep in mind the following:
•Include in the scanning, the proxy server that has a direct connection or a SAN connection to the management server, such as the EMC Solutions Enabler. Make sure the proxy service has started. On a computer running Microsoft Windows, this can be determined by looking in the Services window.
•You cannot scan an IP range to discover an instance of HiCommand Device Manager that listens on a port other than 2001. The management server does not allow port numbers in the scanning of IP ranges, and thus, you are not able to specify the port. See ”Discovering HDS Storage Systems” on page 61 for more information.
•Enter a range within the same subnet. The management server cannot scan IP ranges across subnets.
To add an IP address range to scan:
1.Click Tools > Storage Essentials > Home on the HP SIM home page menu. The Storage Essentials home page opens in a separate web browser window. From the Storage Essentials home page, click Discovery, then click Setup in the upper right pane of the Storage Essentials window.
2.Click the IP Ranges tab.
The IP ranges already added are listed.
3.Click the Add Range button.
4.In the From IP Address field, type a lowest IP address in the range to be scanned.
5.In the To IP Address field, type the highest IP address in the range to be scanned.
6.In the User Name (Optional) field, type a common user name for elements in the IP range.
7.In the Password (Optional) field, type a common password for elements in the IP range.
8.In the Verify Password field, retype the password.
9.In the Comment field, type a brief description of the servers. For example, “Servers in Marketing.”
10.Click OK.
11.Click the Start Scanning button on the IP Ranges tab.
The management server scans the IP range and populates the Addresses to Discover table on the IP Addresses tab.
Adding a Single IP Address or DNS Name for Discovery
Keep in mind the following for discovering Engenio storage systems:
•Discover both controllers for the Engenio storage system. Each controller has its own IP address. In Step 1 of discovery, specify all the IP addresses for all the controllers (usually two). The management server discovers these controllers as one single storage system.
24 Discovering Filers, Tape Libraries, Switches and Storage Systems