HP UX 11i Role-based Access Control (RBAC) Software manual # swverify SecurityExt

IMPORTANT: The HP-UX 11i Security Containment feature includes HP-UX RBAC as one of its components. If you install the HP-UX 11i Security Containment feature on a system that has HP-UX RBAC on it as an independent software unit, you must reconfigure HP-UX RBAC before you can use it with the fine-grained privileges and compartments components of HP-UX 11i Security Containment. Use the following command to reconfigure HP-UX RBAC:

#swconfig -x autoselect_dependencies=false -x reconfigure=true RBAC

To download the HP-UX 11i Security Containment bundle from Software Depot, follow these steps:

1.Go to HP Software Depot at http://www.hp.com/go/softwaredepot.

2.Search for HP-UX 11i Security Containment. Read the product information Web page for the latest updates and release information.

3.Click Receive for Free>>.

4.Choose the correct version of HP-UX 11i Security Containment for your system.

5.Enter your registration information. Read and accept the Terms and Conditions and the Software License Agreement.

6.Click Download. Save the HP-UX 11i Security Containment bundle, SecurityExt, as a local file on your system. For example:

/tmp/<security_containment_bundle>.depot

NOTE: The name of the HP-UX 11i Security Containment bundle may change. Check Software Depot for the correct bundle name.

7.Verify that the depot file is saved on your system by using the following command:

# swlist -d @ /tmp/<security_containment_bundle>.depot

To install HP-UX 11i Security Containment, follow these steps:

1.Be sure your system meets all requirements, as described in “Prerequisites and System Requirements”.

2.Download the HP-UX 11i Security Containment bundle from Software Depot as described in the previous procedure.

3.Log in to your system as the root user.

4.Install HP-UX 11i Security Containment by using the following command:

#swinstall -x autoreboot=true -s

/tmp/<security_containment_bundle>.depot SecurityExt

5.Go on to “Verifying the HP-UX 11i Security Containment Installation”.

Verifying the HP-UX 11i Security Containment Installation

Verify the installation of HP-UX 11i Security Containment with the following steps:

1.Run the swverify command to ensure that the bundle installed correctly:

#swverify SecurityExt

If the installation is successful, many files are displayed and a success message appears after the verification is complete.

2.Run the swlist command to verify that all parts of HP-UX 11i Security Containment are configured correctly on your system:

# swlist -a state -l fileset SecurityExt

If the product is configured correctly, each fileset is displayed as configured.

22 Installation