Installing HP-UX Role-Based Access Control
The following procedure describes how to install only HP-UX RBAC from the HP-UX 11i Security Containment bundle. To download and install HP-UX RBAC as a separate product, refer to the HP-UX RBAC Version B.11.23.04 Release Notes on http://docs.hp.com. To download and install the full HP-UX 11i Security Containment feature set, refer to “Installing HP-UX 11i Security Containment”.
NOTE: If you have installed the full HP-UX 11i Security Containment feature set, you already have HP-UX RBAC installed.
To install HP-UX RBAC, follow these steps:
1.Be sure your system meets all requirements, as described in “Prerequisites and System Requirements”.
2.Download the HP-UX 11i Security Containment bundle from Software Depot, as described in “Installing HP-UX 11i Security Containment”.
3.Log in to your system as the root user.
4.Install HP-UX RBAC by using the following command:
# swinstall -x autoreboot=true -s /tmp/<security_containment_bundle>.depot RBAC
5.Go on to “Verifying the HP-UXRole-Based Access Control Installation”.
NOTE: If you install HP-UX RBAC version B.11.23.02 on a system with version B.11.23.01 already installed, and you have modified the database files, the new version does not overwrite the database files.
Verifying the HP-UX Role-Based Access Control Installation
Verify the installation of HP-UX RBAC with the following steps:
1.Run the swverify command to ensure that the bundle installed correctly:
#swverify RBAC
If the installation is successful, many files are displayed and a success message appears after the verification is complete.
2.Run the swlist command to verify that all parts of HP-UX RBAC are configured correctly on your system:
#swlist -a state -l fileset RBAC
If the product is configured correctly, each fileset is displayed as configured.
Installing HP-UX Standard Mode Security Extensions
The following procedure describes how to install only HP-UX Standard Mode Security Extensions (SMSE) from the HP-UX 11i Security Containment bundle. To download and install HP-UX SMSE as a separate product, refer to the HP-UX Standard Mode Security Extensions B.11.23.02 Release Notes (part number 5991–8711) on http://docs.hp.com. To install the full HP-UX 11i Security Containment feature set, refer to “Installing HP-UX 11i Security Containment”.
NOTE: If you have installed the full HP-UX 11i Security Containment feature set, you already have HP-UX SMSE installed.
To install HP-UX Standard Mode Security Extensions, follow these steps:
