HP E1432A User's Guide
Register Definitions
The A24 Registers
The following A24 registers are accessible at the base address defined by the device’s offset Register. The registers at offsets 0 to E16are not accessible using longword (D32) accesses. The registers at offsets 1016to FFFFF16may be accessed by any of the of the D08(EO), D16, or D32 modes.
FFFFF
8000 0
7FFFF
3000 0
2FFFF
2000 0
1FFFF16 0004 F
0003 F
0000 016
Movable DSP Bus Window
Fixed DSP
Bus Window
Send/Receive Data Registers
Fixed DSP
Bus Window
VXI Bus A16
Registers
The A24 registers are defined as follows:
VXI Bus A16 Registers: These are the same registers accessed at the device’s A16 base address.
Fixed DSP Bus Window: Accesses to this region are mapped to the corresponding locations at the base of the internal DSP’s memory map, also accessible through Page 0 of the moveable DSP bus window.
Send/Receive Data Registers: Accesses to any address in this region will read/write the Send and Receive Data registers defined in the A16 register set. VME Bus D32 Block Transfers are supported for these addresses only.
Movable DSP Bus Window: Accesses to this region are mapped (by the Page Map register) to different 512 kB regions of the internal DSP bus.
