HTC DIAM500 manual LED Alerts, Adjusting the Volume

LED Alerts

The buttons below the touch screen and the exterior edge of the Navigation Control which is an LED ring will light up in the following situations:

Control	Light Behavior
Talk Key	Light flashes when there is an incoming call.
End Key	Light stays solid when there is an incoming call.
Navigation Control	 The LED ring shows a “breathing” white light when the battery is being
	charged.
	 The LED ring shows a solid white light when the battery is fully charged.
	 The LED ring flashes a white light once when the battery level is low and
	reaches down to about 10%.
	 The top and bottom parts of the LED ring flashes a white light twice when
	there is a new email message, voicemail, or meeting reminder.
	 A white light goes around the LED ring counterclockwise twice starting from
	the top when there is a missed call or new SMS text message.

The LED ring and the Home, Back, Talk, and End keys will flash a white light once when one of the buttons or the Navigation Control is pressed.

Adjusting the Volume

Adjusting the system volume changes the volume level of sound notifications and audio and video playback, whereas adjusting the ring volume affects only the volume of the phone ring. The system volume and ring volume can be separately adjusted.

1.Touch the icon area in the title bar and then touch the Speaker icon ( ) on the System Status screen.

2.To switch between system volume and ring volume, touch the System and Ring tabs on top of the screen.

3.On either tab, you can do the following:

To increase or decrease the volume level, drag your finger up or down the volume bars. You can also press the Volume Up or Down keys on the left panel of your device.

Volume bars

— or —

24 Section 2A. Device Basics