Print Server Administration User’s Guide
Setting up the Print Server for AppleTalk Printing
To set up your print server so that it can be used for AppleTalk printing:
1.Make sure the AppleTalk protocol is enabled. The AppleTalk check box in the Server Device Configuration window needs to be checked. Select the print server and choose Server Device... from the Configuration menu to display this window.
2.Choose AppleTalk Protocol... from the Configuration menu.
3.If your AppleTalk network is divided into AppleTalk zones, you will have to specify which zone the print server should be in. You should locate the print server in the same zone as most of the users who will be using it.
If your network is not divided into zones, the AppleTalk Zone field should contain a single asterisk “*”.
4.For each printer port that will be used for AppleTalk printing, you may need to change the AppleTalk port setttings. Press the appropriate Port Setting button to open the AppleTalk Port Configuration dialog window.
EtherP Admin will display the port’s Chooser Name (which is the same as the port name) and allow you to change the port’s settings:
EtherP Admin Administration | 41 |
