Print Server Administration User’s Guide
1.Make sure you are logged on to your NetWare server as SUPERVISOR, or that you have permissions equivalent to SUPERVISOR.
2.Make sure that the NetWare protocol is enabled in the server. This setting is found in the Server Device Configuration window, accessible by selecting the print server and choosing Server Device... from the Configuration window.
3.Choose Netware Protocol... from the Configuration menu, or click the Configure NetWare button in the toolbar. Click on the Bindery Print Server tab.
4.Click on the port button corresponding to the port you want to serve the print queue.
5.Click on the name of the NetWare file server where you wish the print queue to be stored. (Clicking on the 
symbol to the left of the file server name will expand the list of print queues on the file server.)
6.Unless you want to use an existing print queue on the server, you will need to create a new print queue. Click the Create Queue... button, then type in the name of the new print queue and determine the file server volume where you want the print queue to be stored. Click OK to create the queue.
7.Click on the print queue name.
14 | EtherP Admin Administration |
