Manuals / Brands / Computer Equipment / Printer / Hypertec / Computer Equipment / Printer

Hypertec Fastprint Multiprotocol Ethernet/Fast Ethernet Print Server manual 79

1 82

Download 82 pages, 945.05 Kb

Print Server Administration User’s Guide

To perform the download:

1.Make sure you have backup copies of the previous version of the firmware image files before overwriting them with the new ones.

2.Place the two firmware image files in the root of your TFTP server directory. (On some versions of the UNIX operating system, the TFTP server directory is found in /tftpboot.)

3.Connect to the print server using telnet, and select Tools from the Main Menu.

4.Choose Download Firmware. The print server will display the Download Firmware menu.

[Download Firmware]

1 - TFTP Server IP Address <0.0.0.0>

2 - Download

0 - Return to Tools Menu

Enter Selection:

5.Choose the TFTP Server IP Address selection. Enter the IP address of the system you have designated as the TFTP server. For example:

Input TFTP Server IP Address: 203.69.140.234

6.Choose the Download selection. Provided all files are set up correctly, the print server will download the .DWL file, reset itself (closing the telnet connection), and begin downloading the .BIN file. When this is complete, the print server will restart, using the updated version of the firmware.

WARNING: When downloading the image file, be very careful not to interrupt the transfer by powering down the print server or disconnecting it from the network. The print server should be able to recover from an interrupted transfer in most cases, provided the TFTP server remains available. However, in some situations it may be necessary to return your print server for servicing in order to recover from an interrupted download.

Index

AppleTalk zone, 72	options, 38
ARP (address resolution protocol), 114	carriage return/linefeed translation, 80
arp command, 114	Communication Retries, 96
authentication trap, 78	Communication Timeout, 96
banner, NetWare print job, 38	community name, 78
baud rate	Configuration menu
port, 18	AppleTalk Protocol..., 72
BIN file, 108, 128	NetBEUI Protocol..., 56
bindery, 42	NetWare Configuration, 47
bindery emulation, 43	NetWare Protocol..., 25, 28, 39, 48
bindery emulation mode, 21	Save Configuration, 15, 19, 27, 47, 49, 73, 77
BOOTP (Boot Protocol), 113	Server Device..., 13, 14, 17, 72, 76
BSD/OS, 81	TCP/IP Protocol..., 77, 78, 79
CAPTURE command, 21, 37, 54	Configure AppleTalk button, 92

73

Contents

Page Copyright Statement Trademarks Limited Warranty ABOUT THIS GUIDE P A SETTING UP NOVELL NETWARE 3.X PRINTING SETTING UP NOVELL NETWARE 4.X PRINTING SETTING UP APPLETALK PRINTING SETTING UP UNIX TCP/IP PRINTING ETHERP ADMIN ADMINISTRATION : T Page Page Page Page Page Page Run… File Start Next Browse Page Server Device Configuration Configure Server Server Name Password Port Name Description Speed PJL Printer ◊Port Name See above ◊Description See above Baud Rate Data Bits Stop Bits Print Test Tools Page Page Netware Protocol Bindery Print Server Create Queue Add Save Configuration Bindery Remote Printer Windows 95 Client Workstations Settings Printers Add Printer Network printer Finsh Network printer server Windows NT 3.51 Client Workstations Connect to Printer Printer Windows 3.x and Windows for Workgroups 3.11 Workstations Printer Setup Options Install Connect Queue Service Settings To access the Queue Service Settings tab Queue Polling Interval Form Type Service Queue Service Mode Change as needed Service only currently mounted forms Minimize form changes across print queues Create Object Create Print Server Assignments Add NetWare Protocol NDS Print Server NDS Remote Printer Windows 95 Workstations Page Windows 3.1 and Windows for Workgroups 3.11 Workstations Page NetBEUI Protocol Page Page Page Page Windows for Workgroups Client Workstations Printer Setup… Install Close Page My Computer Shared 2.Choose Create Printer... from the Printer menu Setting up the Print Server for AppleTalk Printing 2.Choose AppleTalk Protocol... from the Configuration menu Printer Type PostScript Level Printing from MacOS Client Workstations Chooser Select Setup Page Setup NIX 2.Choose TCP/IP Protocol... from the Configuration menu Allowing SNMP-basedManagement 1.Choose TCP/IP Protocol... from the Configuration menu SNMP Setting up SNMP Traps Trap Send SNMP Traps Page Note: Printer Manger 5.From the Edit menu, select Add Printer, then Add Access to Remote Printer Printer Name Printer Server Printing from Windows NT Printing using TFTP Printing using FTP Page The EtherP Admin Main Window Filtering the List of Print Servers Working with Environment Files and Preferences Load Environment File on Startup Communication Timeout Communication Retries Discover Local Network More NetWare Print Jobs Print Jobs Delete Job Operator Hold User Hold Form Type Managing Print Queues Delete Assignments Assign NetWare Print Servers Assign Operators Assign Users Managing Printers Printers Assign NetWare Print Queues Assign NetWare Notifications Managing Print Servers Print Servers Print Server Assignments Assign NetWare Printers 1. Select Reset or Factory Reset from the Tools menu Yes Factory Reset Status Statistics Log Save to File Page Page Page Page Page Page Page Both