|
|
| Print Server Administration User’s Guide | |
|
|
|
| |
[SNMP Traps] |
|
|
| |
1 | - Traps |
| <Disable> | |
2 | - Target 1 | IP Address | <203.69.140.234> |
|
3 | - Target 1 | Community Name | <public> | |
4 | - Target 2 | IP Address | <0.0.0.0> |
|
5 | - Target 2 | Community Name | <> |
|
6 | - Target 3 | IP Address | <0.0.0.0> |
|
7 | - Target 3 | Community Name | <> |
|
0 | - Return to TCP/IP Menu |
|
| |
Enter Selection:
By default, SNMP traps are disabled. Select the Traps item to enable or disable the sending of traps:
1.Disable
2.Enable
0. Return to SNMP Traps Menu
Enter Selection:
Once traps are enabled, you can assign up to three different hosts as designated trap recipients. With each trap recipient IP address, there is also an associated SNMP community name that will be included in the IP request. To change an IP address or community name, select the appropriate menu item and enter the desired value.
3.When you are done changing TCP/IP settings, choose 0 to return to the Main Menu.
4.Choose the Save Configuration menu item. The print server will ask for confirmation:
Do you really want to save the configuration? (y/n)
Answer y to confirm the save. The telnet connection will drop, and the print server will reset itself, letting the new TCP/IP settings take effect.
Changing Server Settings
From the Server Configuration menu, you can change the server name, as well as the Location and Contact fields (used for identifying the location of the print server and the person responsible for maintaining it).
To change one of these settings,
1.From the main menu, choose Server Configuration. The print server will display the Server Configuration menu.
EtherP Admin Administration | 67 |
