EasyCoder 3400e Bar Code Label Printer User’s Manual
Adjusting the Label Mark Sensor
The label mark sensor detects the mark on the back of continuous media stock. The printer uses the output to determine the start of print. The label mark sensor is behind the platen roller and near the inboard edge of the printer.
To adjust the label mark sensor
1.Remove the media cover and locate the label mark sensor.
2.Use your index finger to slide the label mark sensor to the correct position for your media. You can position the label mark sensor anywhere from the inboard edge of the printer to the center of the paper path.
3.Enable mark printing with PrintSet, your
4.Print a few labels or press Feed/Pause two times to make sure that the label mark sensor is detecting the black mark on the media.
5.Replace the media cover.
