IBM EasyCoder 3400e Setting Configuration Commands in Test and Service Mode, To use memory reset

EasyCoder 3400e Bar Code Label Printer User’s Manual

Resetting the Memory on Your Printer

Use memory reset if you want to return your printer to its default configuration or if you need to increase the amount of memory available in your printer. You can also use memory reset to clear pages and formats, user-defined characters and fonts, configurations, tables, or all of these parameters.

To use memory reset

1.Turn the printer off.

2.Press and hold the Feed/Pause button while turning on the printer. The printer prints a hardware configuration test label.

3.Set the DIP switches to reset a portion or all of the memory by using the Test and Service DIP Switch Settings table on page 6-4.

4.Hold the Feed/Pause button down for 1 second. The printer resets a portion or all of its memory.

Setting Configuration Commands in Test and Service Mode

Test and Service mode also provides you with an alternative to using PrintSet or sending configuration commands down from the host. You can change these configuration commands by setting the Test and Service mode DIP switches:

•Label rest point

•86XX emulation

•X forms adjust

•Y forms adjust

The following table provides you with the Test and Service mode DIP switch settings for changing the configuration commands.

6-6