Integra DTR-6.2 Connecting speakers, Connect to devices with multichannel output, RS 232 port

Connections

Connect to devices with multichannel output

By connecting a DVD player, MPEG decoder, or other component that has a multi channel port, you can playback the audio with 5.1 channel output. So, be sure to prepare a cable that can properly connect the DTR-6.2 to the peripheral device.

Center output
	L (White)
Front output
DVD Player/MPEG decoder		FRONT SURR CENTER
	R (Red)	L
	GND
	R (Red)	R
			SUB
Surround output	SUBWOOFER
		MULTI	WOOFER
	PRE OUT	CHANNEL INPUT
	L (White)
Subwoofer output

Plugging in the power cord to the AC INLET receptacle

Plug the supplied power cord into this AC INLET and then into the power outlet on the wall.

•Do not use a power cord other than the one supplied with the DTR-6.2. The power cord supplied is designed for use with the DTR-6.2 and should not be used with any other adevice.

•Never have the power cord disconnected from the DTR-6.2 while the other end is plugged into the wall outlet. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first.

AC INLET

Power cord (supplied)

To an AC wall outlet

RS 232 port

The RS 232 port is to be used in conjunction with an external controller to control the operation of the DTR-6.2 by using an external device.

Connecting speakers

Positioning speakers

Speaker placement plays an important role in the reproduction of Surround sound. The placement of the speakers varies depending on the size of the room and the wall coverings used in the room. The illustration shows an example of a layout for standard speaker placement. Refer to this example when you position the speakers in order to experience the best of Surround sound.

Standard speaker placement

For ideal Surround effects, all speakers should be installed. If a center speaker or subwoofer is not connected, the sound from the unused channel is properly distributed to the connected speakers in order to produce the best Surround sound possible.

Front: The left, right, and center speakers should face the seated listener and be placed at ear level. The center speaker produces a richer sound image by enhancing the perception of the sound’s source and movement.

Surround: Place the left and right Surround speakers 3 feet (1 meter) above the listener’s ear level and facing toward the sides of the room, making sure that the listener is within the speakers’ dis- persion angle. These speakers produce the feel of a moving sound while creating the sensation of being in the middle of the action.

Subwoofer: Install a subwoofer with a built-in power amplifier for powerful bass sounds. The placement of the subwoofer does not affect the final quality of the sound image too much, so you can install it with the room layout in mind.

Refer to the speaker’s instruction manual for more details.

		TV or Screen
Front	Sub-	Center	Front
left			right
	woofer	speaker
speaker			speaker
Surround			Surround
left			right
speaker			speaker
		Listener

17