Integra DTR-6.2 instruction manual Specifications

Specifications

AMPLIFIER SECTION

Continuous Average Power output (FTC)

All channels:	100 W per channel min. RMS at 8
	Ω, 2 channels driven from 20 Hz
	to 20 kHz with no more than
	0.08% total harmonic distortion.
	125 W min. RMS at 6 Ω, 2
	channels driven from 1 kHz with
	no more than 0.1% total
	harmonic distortion.
Continuous Power output (DIN)	130 W at 6 Ω
Maximum Power output (EIAJ)	160 W at 6 Ω
Dynamic Power Output (Stereo)	2 ⋅ 230 W at 3 Ω
	2 ⋅ 170 W at 4 Ω
	2 ⋅ 115 W at 8 Ω
Total Harmonic Distortion:	0.08% at rated power
	0.08% at 1 W output
IM Distortion:	0.08% at rated power
	0.08% at 1 W output
Damping Factor:	60 at 8 Ω
Input Sensitivity and Impedance
PHONO:	2.5 mV, 50 kΩ
LINE (CD, TAPE, DVD,
VIDEO 1-4):	200 mV, 50 kΩ

MULTICHANNEL INPUT (FRONT L/C/R, SURROUND L/R):

	200 mV, 50 kΩ
(SUBWOOFER):	36 mV, 50 kΩ
COAXIAL 1, 2 (DIGITAL):	0.5 Vp-p, 75 Ω
DVD, VIDEO1-4:	1 Vp-p, 75 Ω
	1 Vp-p, 75 Ω (Y)
	0.28 Vp-p, 75 Ω (C)
COMPONENT VIDEO 1, 2:	1 Vp-p, 75 Ω (Y)
	0.7 Vp-p, 75 Ω (CB/CR, PB/PR)
Output Level and Impedance
Rec out (TAPE, VIDEO 1, 2):	200 mV, 2.2 kΩ
Pre out:	1 V, 470 Ω
VIDEO (VIDEO 1, 2, MONITOR OUT):
	1 Vp-p, 75 Ω
	1 Vp-p, 75 Ω (Y)
	0.28 Vp-p, 75 Ω (C)
COMPONENT VIDEO OUT:	1 Vp-p, 75 Ω (Y)
	0.7 Vp-p, 75 Ω (CB/CR, PB/PR)
ZONE 2 LINE OUT:	100 mV, 1 kΩ
Phono Overload:	110 mV RMS at 1 kHz, 0.5% T.H.D.
Frequency Response:	5 Hz to 100 kHz: +1 dB, –3 dB
RIAA Deviation:	20 Hz to 20 kHz : ±0.8 dB
Tone Control
Bass:	±10 dB at 50 Hz
Treble:	±10 dB at 20 kHz
Signal-to-Noise Ratio (Stereo)
Phono:	80 dB (IHF A, 5 mV input)
CD/Tape:	100 dB (IHF A, 0.5 V input)
Muting:	–50 dB

TUNER SECTION

FM

Tuning Range:	87.5 to 108.0 MHz (50-kHz steps)
Usable Sensitivity
Mono:	11.2 dBf, 1.0 µV (75 Ω IHF)
	0.9 µV (75 Ω DIN)
Stereo:	17.2 dBf, 2.0 µV (75 Ω IHF)
	23 µV (75 Ω DIN)
50 dB Quieting Sensitivity
Mono:	17.2 dBf, 2.0 µV (75 Ω)
Stereo:	37.2 dBf, 20 µV (75 Ω)
Capture Ratio:	2.0 dB
Image Rejection Ratio:	40 dB
IF Rejection Ratio:	90 dB
Signal-to-Noise Ratio
Mono:	76 dB
Stereo:	70 dB
Alternate Channel Attenuation:	55 dB
Selectivity:	50 dB (DIN)
AM Suppression Ratio:	50 dB
Total Harmonic Distortion
Mono:	0.2%
Stereo:	0.3%
Frequency Response:	30 Hz to 15 kHz, ±1.0 dB
Stereo Separation:	45 dB at 1 kHz
	30 dB at 100 Hz to 10 kHz
AM
Tuning Range:	530 to 1,710 kHz (10-kHz steps)
Usable Sensitivity:	30 µV
Image Rejection Ratio:	40 dB
IF Rejection Ratio:	40 dB
Signal-to-Noise Ratio:	40 dB
Total Harmonic Distortion:	0.7%
GENERAL
Power Supply:	AC 120 V, 60 Hz
Power Consumption:	5.7 A
Dimensions (W ⋅ H ⋅ D):	17-1/8" ⋅ 6-7/8" ⋅ 17"
Weight:	28.0 lbs.
REMOTE CONTROLLER
Transmitter:	Infrared
Signal range:	Approx. 5 meters, 16 ft.
Power supply:	Two “AA” batteries (1.5 V ⋅ 2)

Specifications and features are subject to change without notice.

Power supply and voltage vary depending on the area in which the unit is purchased.

61