Integra DTR-6.2 Controlling an Integra/Onkyo MD recorder, SAT, CABLE, VCR, and TV MODE buttons

Using remote controller

ON STDBY

MD MODE

VOL

MUTING

MD

operation buttons

Numeric keys

ENTER

HOME THEATER CONTROLLER

RC-441M

Controlling an Integra/Onkyo MD recorder

The z connector of the Integra/Onkyo MD recorder must be connected to the DTR-6.2 (see page 16).

1.Press the MD MODE button.

The MD MODE button lights green.

2.Press the desired operation button.

The buttons shaded in the figure to the left are the operation buttons that can be used to control an Integra/Onkyo MD recorder.

Operation buttons:

ON: Turns on and off the MD player (same as STDBY button on the remote controller).

: Track down

: Track up

: Play

: Stop

: Fast reverse

: Fast forward R (Rec): Record : Pause

r: Eject the disc

1 to 9, 0, --/---: Numeric keys

ENTER: Enters the settings

You may also use the following buttons:

VOL : Adjusts the volume at the DTR-6.2

MUTING: Activates the muting function at the DTR-6.2

CABLE

SAT

VCR

TV

VOL

MUTING

SAT, CABLE, VCR, and TV MODE buttons

No preset codes are programmed into the SAT, CABLE, VCR, and TV MODE buttons. You can use these buttons to program the remote controller signals of other devices.

There are two methods. One method is selecting the name of a different brand from the table, entering the setting number listed, and calling up the pre-programming code (see page 50). The other method is learning the commands from the other brand’s remote control directly into this remote controller (see page 54).

When in the SAT, CABLE and VCR mode, you may use the following buttons:

VOL : Adjusts the volume at the DTR-6.2

MUTING: Activates the muting function at the DTR-6.2

49