Integra DTR-6.2 Using listening mode, Changing the listening mode, Using Cinema Re-Equalization

Using listening mode

Jog dial

Standby/On	Rec Out	Zone 2	Zone 2 Level	CH Level
		DSP/ Mode ADJ		Setup
Standby
				Return
Power

Push To Enter

On Off
Display	Dimmer	FM Mode Preset Memory	Tuning	Preset	Smart Scan Navigator

Phones	Audio
	Selector	DVD	Video 1	Video 2	Video 3	Video 4	Tape	FM	AM	Phono	CD
			VCR 1	VCR 2

Master Volume

Bass Treble

Listening

mode

buttons Re-EQ

HOME THEATER CONTROLLER

RC-441M

Changing the listening mode

To change the listening mode during playback, press the listening mode buttons on the remote controller.

You can also set the listening mode using the jog dial on the DTR-

6.2.Push the jog dial repeatedly to cycle the listening mode from Direct→Stereo→Surround→All Ch Stereo→Direct. Turn the jog dial to change the listening mode in the same manner as DSP / on the remote controller.

DTR-6.2	Remote controller
DSP/Mode ADJ

Push To Enter

DIRECT: Changes the listening mode directly to the Direct listening mode. If pressed, the listening mode for the selected input source set in the Listening Mode Preset sub-menu is also changed to the Direct listening mode.

STEREO: Changes the listening mode directly to the Stereo listening mode. If pressed, the listening mode for the selected input source set in the Listening Mode Preset sub-menu is also changed to the Stereo listening mode.

SURR (Surround): Changes the listening mode to the surround mode for the current input signal (e.g., Dolby Pro Logic II, Dolby Digital, or DTS). If pressed, the listening mode for the selected input source set in the Listening Mode Preset sub-menu is also changed to the Surround listening mode.

For Dolby Pro Logic II, this button also changes the mode between Dolby Pro Logic II Movie and Dolby Pro Logic II Music.

A.ST(All Channel Stereo): Changes the listening mode directly to the Stereo listening mode. If pressed, the listening mode for the selected input source set in the Listening Mode Preset sub-menu is also changed to the All Channel Stereo listening mode.

DSP /: Changes the listening mode as shown below.

Direct ↔ Stereo ↔ Surround ↔ Orchestra ↔ Unplugged ↔ Studio-Mix ↔ TV Logic ↔ All Ch Stereo ↔ Direct.

If pressed, the listening mode for the selected input source set in the Listening Mode Preset sub-menu is also changed.

Note:

If you want to switch between Dolby Pro Logic II Movie and Dolby Pro Logic II Music at the DTR-6.2, press the jog dial and select “Surround” for the listening mode.

Using Cinema Re-Equalization

Depending on the listening mode, you can either turn Re-EQ on or off. Re-EQ (re-equalization) takes the edginess or “brightness” out of your home cinema sound to compensate for the fact that sound mixed for theaters may sound too bright when played back through speakers in the home environment.

Remote cotroller only

On: Select to turn on the re-equalization filter.

Off: Select to turn off the re-equalization filter.

Note:

The Re-EQ function is effective on the Dolby Pro Logic II Movie and Dolby Digital modes.

33