Integra DTR-6.2 instruction manual Input Setup menu, Audio Setup sub-menu, Setup menus

Setup menus

2. Input Setup menu

This menu allows you to setup the various input sources available with the DTR-6.2. Each input source may have a great number of settings that are difficult to keep track of, so we recommend making a chart to record what you have set and for which component to prevent confusion later.

Menu
1.Speaker Setup
2.Input Setup
2.Input Setup
		Input:DVD
3.Listening			Mode Setup	Current
4.Preference
	1.Audio Setup			Input
5.OSD Setup
	2.Video Setup
	3.Listening Mode Preset			Source
	4.IntelliVolume
	5.12V trigger
	ENTER Quit:OSD
		ENTERQuit:SETUP

2-1. Audio Setup sub-menu

Menu

1.Speaker Setup 2.Input Setup 2.Input Setup

Input:DVD 3.Listening Mode Setup

4.Preference 2a-.1Audio.AudioSetupSetup

5.OSD Setup b.VideoInput:DVDSetup

c.ListenAudio:Auto(COAX1)ng Mode Preset d.Tone Control ea..IntelliVolumeDigitalInput:COAX1

f.12V Trigger ENTER Quit:OSD

b.Multichannel :Yes ENTER Quit:OSD

Quit:SETUP

The settings made in this sub-menu are valid for the input source that is currently selected with the input source buttons at the front panel and, therefore, these settings are made separately for each digital input source. This sub-menu will not appear if the selected input source button is AM or FM. If this setting is incorrectly made, the digital audio signals may not be properly output, or not heard at all.

a. Digital Input

This setting tells the DTR-6.2 which input source button on the front panel is connected with which digital input jack on the rear panel. To perform this setting, you must first select a digital input source at the front panel and then set the name of the digital input jack it is connected to here.

For example, if the input source selected at the front panel is CD and the compact disc player is connected to DIGITAL INPUT (OPTICAL) 1, then select “OPT1” here. If the input source selected is not connected to a digital input, then select “----.”

OPT1: Select if connected to DIGITAL INPUT (OPTICAL) 1.

OPT2: Select if connected to DIGITAL INPUT (OPTICAL) 2.

COAX1: Select if connected to DIGITAL INPUT (COAXIAL) 1.

COAX2: Select if connected to DIGITAL INPUT (COAXIAL) 2.

----:Select if the input source is not from a digital input jack.

Note:

Do not assign a digital input to more than one input source. If you are making a digital connection that requires you to change the default settings, be sure to always first cancel the current digital input setting and then assign the new setting.

b. Multichannel

This sub-menu will not appear if AM or FM is selected at the front panel for the input source. The initial settings are “Yes” for the DVD input source and “No” for all other input sources. This setting is normally set to “No,” and only needs to be changed to “Yes” if a DVD player, MPEG decoder, or other component that has a multi channel port is connected to the MULTI CHANNEL INPUT port for 5.1-channel audio. For example, if a DVD player is connected to the MULTI CHANNEL INPUT port, then select DVD at the front panel as the input source, bring up this sub-menu, and select “Yes” for the Multichannel setting. You can only select Multichannel with the Audio Selector button when “Yes” is selected here.

Note:

When playing a device that is actually connected to the MULTI CHANNEL INPUT terminal, select Multichannel with the Audio Selector button.

Initial settings for each input source

Input source	Digital input	Multichannel
DVD	COAX 1	Yes
Video 1	COAX 2	No
Video 2	----	No
Video 3	OPT2	No
Video 4	----	No
Tape	----	No
FM
AM
Phono	----	No
CD	OPT 1	No

----: Available for digital input but not set in initial settings.

: Not available for digital input.

38