Integra DTR-6.2 instruction manual Remote controller, 1 2 3 4 5 6 7 8 90 A B C

For executing and programming the Direct Macro function.

F

SEND/LEARN indicator [50, 54, 56]

This indicator acts as a guide when commands are programmed into or sent by the remote controller. It also warns the user when an error is made or battery power is low.

ON/STDBY button [21, 47-50, 52, 53, 60] ON: Turns on the DTR-6.2.

STDBY: Places the DTR-6.2 in the standby state.

Be aware that pressing the STDBY button only places the DTR-6.2 in standby and does not turn the power completely off.

D SLEEP button [30]

Sets the sleep function.

E The SLEEP button enables you to set the DTR-6.2 to turn off automatically after a specified time period.

DIRECT MACRO button [58, 59]

Remote controller

1

2

3

4

5

6

7

8

90 A

B

C

HOME THEATER CONTROLLER

RC-441M

	G	MODE buttons and indicators [21, 28, 46-59]
		For selecting the component to be operated by the remote controller.
	H
		When a MODE button is pressed, it will light green for 8 seconds.
I		The selected MODE button will also light whenever any other
		operation button is pressed to tell you which mode the remote

Jcontroller is in.

RETURN button [35, 48]

For entering the selected setting and returning to the previous menu.

CH/DISC button [28, 46-48, 52, 53]

When in the RCVR mode, for selecting a tuner preset channel.

For selecting the disc to be played back for components with disc changers when in the DVD or CD modes.

CH SEL/TOP MENU button

CH SEL: For selecting the speaker for level adjustment when in the RCVR mode. Used together with the LEVEL / buttons. [30]

TOP MENU: When in the DVD mode, for displaying the menu screen(s) recorded on DVD media. [48]

AUDIO/A/TV/VCR button

KAUDIO/A: For selecting the audio input signal. The setting changes from “AUTO” to “Multich” to “Analog” and back each time this button is pressed. [31, 48]

TV/VCR: Must be preprogrammed for use in the TV and VCR modes. [53]

LEVEL /ANGLE and LEVEL /SUBTITLE buttons

LEVEL /: Select the speaker whose volume is to be adjusted using the CH SEL button and adjust the volume using the LEVEL / buttons in the RCVR mode. [30]

ANGLE: When in the DVD mode, for selecting a camera angle when a DVD-Video is recorded with multiple angle playback. [48]

SUBTITLE: When in the DVD mode, for selecting one of the subtitle languages recorded on a DVD-Video. [48]

CD/TAPE/DVD/MD operation buttons [46-48, 53]

For operating Integra/Onkyo components connected to the DTR-6.2.

10