Intel EK-KZPCM-UG manual Descriptions of the Main Menu Selections, Nvram

KZPCM PCI–to–Dual Channel Ultra SCSI and 10/100MB Ethernet Host Adapter

Figure 3–1Configuration Utility Main Menu

MAIN MENU

		Port	IRQ	– Status –		NVRAM
		Num	Level	Current	Next-Boot	Found
1	SYM53C875	8400	10	ON	ON	YES
2	SYM53C875	8600	10	ON	ON	YES

B….…Adapter Boot Order

C….…Change Adapter Status

D….…Display Mode = Verbose

M….…Mono/Color

F1…..Help

Q….…Quit

Use arrow keys to select from menu. Then press ENTER

3.2Descriptions of the Main Menu Selections

The selections in the Main Menu have the following meanings:

∙Select Current SCSI Channel [1(2)] – Highlight one of the SCSI channels using the arrow keys to select the adapter or channel you wish to modify. One entry will be available for each adapter in the system. The following selections are global and refer to all adapters found in the system.

∙Adapter Boot Order [B] – Allows you to select the order in which the host system will scan the adapters, allowing a re-ordering of boot devices. Choice will only appear in the menu if more than one adapter channel is found.

∙Change Adapter Status [C] – Allows adapters or channels to be disabled, so they will not be made available to the operating system on subsequent system boots until being re-enabled. This feature should be used only during system debug.

∙Display Mode [D] – Changes default message format from Verbose to Terse.

∙Mono/Color [M] – Changes screen from color to monochrome.

∙Help [F1] – On screen help utility. Provides help on current menu screen.

∙Quit [Q] – Exit the utility.

3–2 EK–KZPCM–UG. B01