Intel EK-KZPCM-UG manual Parameter Console Operating System SRM

Chapter 3. Installing the KZPCM Host Adapter

Table 3-1 Parameter Settings Quick Reference Chart

PARAMETER	CONSOLE		OPERATING SYSTEM
	SRM	Alpha	VMS	UNIX	NT
		BIOS
SCSI ID	Pkn0_ho	^C bios	Uses	Set by	Reads
	st_id	to set,	pkn0_host_	UNIX shell	EEROM
		default	id set at	script, and	set under
		is 7	SRM	pkn0_host_	AlphaBios
				id	^C utility
Sync TX Rate	Pkn0_fas	^C bios	Uses MAX	Uses MAX	Reads
	t (default	to set,	rate target	rate target	values set
	is true or	default	device is	is capable	by ^C
	use MAX	is MAX	capable of	of; can be	bios.
	rate, 0 is			changed	Default is
	use 5			on a target-	MAX
	MB/sec)			by-target
				basis using
				ddr.dbase
				file
Wide/Narrow	Automati	^C bios	Automatic.	Automatic.	Reads
	c	to set,	Arbs on a	Arbs on a	values set
		default	target-by-	target-by-	by ^C
		is	target	target	bios.
		WIDE	basis.	basis.	Default is
			Always	Target	WIDE
			tries to run	parameters
			WIDE	can be
				forced
				using the
				ddr.dbase
				file
Allow	No	^C bios	Automatic.	Automatic.	Reads
Disconnects		to set,	Arbs on a	Arbs on a	values set
		default	target-by-	target-by-	by ^C
		is Yes	target	target	bios.
			basis.	basis.	Default is
			Always	Target	Allow
			allows	parameters	Disconne
			disconnect	can be	cts
			s if target is	forced
			capable	using the
				ddr.dbase
				file

EK–KZPCM–UG. B01 3–7