Intel EK-KZPCM-UG DIGITAL OpenVMS, Version 7.1-1H2 or Higher, $ mount dva0 3pbkit, 4. $ reboot

KZPCM PCI–to–Dual Channel Ultra SCSI and 10/100MB Ethernet Host Adapter

The procedure is now complete, and you can continue with any other configura- tion tasks. No further or future intervention will be required to boot this disk with KZPCM Host Adapter devices. Should an upgrade be required, repeat only the PROD INSTALL ITI3140 portion of the above procedure

5.2.1.2 Installing the Driver in an Existing System

1.Place the KZPCM Third Party Boot installation disk for DIGITAL OpenVMS, V7.1-1H1, in the floppy driveDVA0:

2.Mount the floppy disk

$ mount dva0 3pbkit

%MOUNT-I-MOUNTED, 3PBKIT mounted on _LAB10$DVA0:

1.Set default to the KIT directory on the floppy $ set def dva0:[000000]

2.Invoke PCSI to install the driver

$ product install ITI3140

3.After the installation completes, reboot the system.

4.$ reboot

The procedure is now complete, and you can continue with any other configura- tion tasks. No further or future intervention will be required to boot this disk with the KZPCM Host Adapater. Should an upgrade be required, repeat only the Existing System Installation portion of the above procedure

5.2.2 DIGITAL OpenVMS, Version 7.1-1H2 or Higher

Do the procedures in this subsection to install the driver in a new system or in an existing system.

5.2.2.1 Installing the Driver in a New System

On VMS Version V7.1-1H2 and later, the KZPCM adapter is available for use as the system disk controller, via the DIGITAL OpenVMS third-party boot pro- gram. If you are installing a KZPCM adapter in a system that is not running DIGITAL OpenVMS already, use the third-party boot process that follows.

1.Place the DIGITAL OpenVMS installation CD in your CD-ROM drive.

2.Insert the DIGITAL OpenVMS driver floppy diskette in the system floppy disk drive.

5–6 EK–KZPCM–UG. B01