Removing the Processor Fan (If Applicable)

This procedure describes how to remove the processor fan from a replacement processor. Due to space constraints, the server will not accommodate a processor with a fan mounted on the heat sink. Sufficient cooling is provided in the server without the processor fan.

If the processor you wish to install has a fan mounted on top of the heat sink, remove the fan as described in the following procedure. Otherwise, proceed to “Installing the Processor Chip.” Refer to Figure 9 while performing this procedure.

1.Grasp the fan housing at each corner.

2.Gently press and lift on the corners until the fan releases from the heat sink.

OMO9430

Figure 9. Removing the Processor Fan

Removing/Installing Server Components

29

Page 29
Image 29
Intel ISP1100 manual Removing the Processor Fan If Applicable