Intel ISP1100 Removing the PCI Add-in Card(s)

40 Intel ISP1100 Internet Server Product Guide

Removing the PCI Add-in Card(s)

This procedure describes how to remove the PCI add-in card(s) from the server board. Before

proceeding, be sure you are thoroughly familiar with the information in “Before You Begin” at the

front of this chapter.

Removing the Filler Panel Retention Bracket

Perform this procedure to remove the filler panel retention bracket from the server back panel.

Refer to Figure 20 while performing this procedure.

1. Use a Phillips screwdriver and remove the two screws (A) securing the filler panel retention

bracket (B) to the top edge of the server back panel.

2. Remove the retention bracket.

OMO9458

Figure 20. Removing the Filler Panel Retention Bracket

Contents

Main Page Contents 1 Description 2 Removing/Installing Server Components 3 Configuration Software and Utilities 4 Solving Problems Index Figures Tables 1 Description System Components Figure 1. System Components Figure 1 shows the location of the major system components in the Intel ISP1100 Internet Server. Server Board Features Table 1 summarizes the TR440BX server board features. Table 1. Server Board Features Server Board Connectors and Components Figure 2 shows the locations of the server board connectors and components. Figure 2. Server Board Connectors and Components Controls, Connectors, and Indicators Front Panel Figure 4. Back Panel Connectors Figure 3 shows the locations of the server front-panel controls, connectors, and indicators. Figure 3. Front Panel Controls, Connectors, and Indicators Processors Memory Page Chipset Universal Serial Bus IDE Support Real-Time Clock, CMOS SRAM, and Battery I/O Controller Serial Ports Diskette Drive Controller Keyboard and Mouse Interface Hardware Monitor SCSI Hard Drive LED Connector Intel Pro/100+ Server (82559) Ethernet Controllers Wake on LAN Wake on Ring/Resume on Ring Wake on Ring Resume on Ring SMI and NMI Routing Power Connector Speaker Fan Support Table 7. Fan Connector Descriptions 2 Removing/Installing Server Components Before You Begin FCC/Emissions Disclaimer Warnings and Cautions WARNINGS Rackmount Precautions WARNINGS Safety and Regulatory Requirements Safety Compliance Electromagnetic Compatibility (EMC) Tools and Supplies Needed Removing the Server From the Rack Installing the Server in the Rack Removing the Cover Replacing the Cover Removing the Processor Removing the Processor Heat Sink Removing the Processor Chip Installing the Processor Removing the Processor Fan (If Applicable) Installing the Processor Chip Installing the Processor Heat Sink Removing the DIMM Boards Installing the DIMM Boards Removing the Hard Drive(s) Installing the Hard Drive(s) Installing the Hard Drive in the Mounting Bracket Installing the Hard Drive in the Drive Bay Removing the 3.5-inch Diskette Drive Installing the 3.5-inch Diskette Drive Installing the Drive in the Mounting Bracket Installing the 3.5-inch Diskette Drive in the Drive Bay Removing the PCI Add-in Card(s) Removing the Filler Panel Retention Bracket Removing the Riser and Add-in Card(s) Removing the Add-in Card(s) From the Riser Installing the Rear I/O Filler Panel(s) Installing PCI Add-in Card(s) Removing the Riser Card Page Installing the Add-in Card(s) on the Riser Removing the Rear I/O Filler Panel(s) Installing the Riser and Add-in Card(s) Replacing the Back-up Battery ADVARSEL! ADVARSEL VARNING VAROITUS Page Power Up the Server Power Cord Requirements Page Page 3 Configuration Software and Utilities Hot Keys Power-On Self-Test (POST) Using BIOS Setup Table 11. BIOS Setup Function Keys (continued) Main Menu Table 12. Main Menu Advanced Menu Table 13. Advanced Menu Feature Options Description Table 14. Boot Configuration Submenu Table 15. Peripheral Configuration Submenu Table 16. IDE Configuration Menu Table 17. IDE Configuration Submenu Table 17. IDE Configuration Submenu (continued) Table 18. Diskette Configuration Submenu Table 19. Event Log Configuration Submenu Security Menu Table 20 shows the Security menu. This menu sets passwords and security features. Table 20. Security Menu Boot Menu Table 21 shows the Boot menu. This menu sets boot features and the boot sequence. Table 21. Boot Menu (continued) System Management Menu Table 22 shows the System Management menu. This menu sets server management features. Table 22. System Management Menu Exit Menu Upgrading the BIOS Preparing for the Upgrade Recording the Current BIOS Settings Obtaining the Upgrade Utility Creating a Bootable Floppy Diskette Creating the BIOS Upgrade Floppy Diskette Performing the Upgrade Recovering the BIOS Page Page 4 Solving Problems Resetting the System Initial System Startup Running New Application Software After the System Has Been Running Correctly More Problem Solving Procedures Preparing the System for Diagnostic Testing Monitoring POST Verifying Proper Operation of Key System Lights Confirming Loading of the Operating System Specific Problems and Corrective Actions Power Light Does Not Light No Characters Appear on Screen Characters Are Distorted or Incorrect System Cooling Fans Do Not Rotate Properly Diskette Drive Activity Light Does Not Light Hard Disk Drive Activity Light Does Not Light CD-ROM Drive Activity Light Does Not Light Cannot Connect to a Server Problems with Network Problems with Application Software Bootable CD-ROM Is Not Detected Error and Informational Messages Error Codes and Error Messages Table 25. Error Messages Description Table 25. Error Messages Description (continued) Index A B C D I K - L M - N P R S T - U W