Removing the Add-in Cards From the Riser | Intel ISP1100 specification

Removing the Add-in Card(s) From the Riser

Perform this procedure to remove the add-in card(s) from the riser card. Refer to Figure 22 while performing this procedure.

1.Grasp the edges of the riser card and the add-in card you wish to remove.

2.Firmly hold the riser card while gently rocking and pulling the add-in card until the add-in card releases from the riser connector.

3.Remove the add-in card from the riser connector.

OMO9460

Figure 22. Removing the Add-in Card(s) from the Riser

42	Intel ISP1100 Internet Server Product Guide

Image 42

Intel ISP1100 manual Removing the Add-in Cards From the Riser, Removing the Add-in Cards from the Riser

Contents

Intel ISP1100 Internet Server Product Guide Disclaimer Contents Configuration Software and Utilities Figures Tables System Components System Components Feature Server Board FeaturesServer Board Features Description Server Board Connectors and Components Server Board Connectors and Components Controls, Connectors, and Indicators Front PanelBack Panel Processors MemorySupported Processors Supported Memory Characteristics Memory Error Detection ModeDimm Type ECC Disabled ECC Enabled Chipset Universal Serial Bus Real-Time Clock, Cmos SRAM, and Battery IDE Support Controller Serial PortsDiskette Drive Controller Fan Tachometer MUX Control Mapping Hardware MonitorKeyboard and Mouse Interface FanMUXCTL0 FanMUXCTL1 Heceta FAN1TACH Input Scsi Hard Drive LED Connector Intel Pro/100+ Server 82559 Ethernet ControllersWake on LAN Wake on Ring/Resume on Ring Wake on RingResume on Ring Speaker Power ConnectorSMI and NMI Routing SMI and NMI Routing Fan Support Fan Connector DescriptionsConnector Function Before You Begin FCC/Emissions Disclaimer Electrostatic Discharge ESD and ESD Protection Rackmount Precautions Tools and Supplies Needed Safety and Regulatory RequirementsSafety Compliance Removing the Server From the Rack Installing the Server in the Rack Removing/Installing the Server in the Rack Removing the Cover Replacing the Cover Removing the Processor Removing the Processor Heat Sink Installing the Processor Removing the Processor Chip Removing the Processor Fan If Applicable Removing the Processor Fan Installing the Processor Chip Installing the Processor Chip Installing the Processor Heat Sink Installing the Processor Heat Sink Removing the Dimm Boards Removing the Dimm Boards Installing the Dimm Boards Installing the Dimm Boards Removing the Hard Drives Removing the Hard Drives Installing the Hard Drives Installing the Hard Drive in the Mounting Bracket Installing the Hard Drive in the Drive Bay Installing the Hard Drive in the Drive Bay Removing the 3.5-inch Diskette Drive Removing the 3.5-inch Diskette Drive Installing the 3.5-inch Diskette Drive Installing the Drive in the Mounting Bracket Installing the 3.5-inch Diskette Drive in the Drive Bay Installing the 3.5-inch Diskette Drive in the Drive Bay Removing the PCI Add-in Cards Removing the Filler Panel Retention Bracket Removing the Riser and Add-in Cards Removing the Riser and Add-in Cards Removing the Add-in Cards From the Riser Removing the Add-in Cards from the Riser Installing the Rear I/O Filler Panels Installing the Rear I/O Filler Panels Installing PCI Add-in Cards Removing the Riser Card Removing/Installing Server Components Installing the Add-in Cards on the Riser Installing the Add-in Cards on the Riser Removing the Rear I/O Filler Panels Removing the Rear I/O Filler Panels Installing the Riser and Add-in Cards Installing the Riser and Add-in Cards Replacing the Back-up Battery Varning Replacing the Lithium Back-up Battery Power Up the Server Power Cord Requirements Powering Up the Server Removing/Installing Server Components Hot Keys Power-On Self-Test PostConfiguration Utilities Hot Keys Bios Setup Function Keys Using Bios SetupBios Setup Menu Bar Description Main Menu AdvancedMain Menu Peripheral Configuration Submenu Advanced Menu Feature OptionsBoot Configuration Submenu Advanced Menu Options Boot default IDE Configuration MenuIDE Configuration Submenu Sectors default Description Options Auto default Disabled default Diskette Configuration SubmenuEvent Log Configuration Submenu 44/1.25MB 3.5 default Boot Menu Boot MenuBoot Security Menu Power On default Stay Off default Last State defaultStay Off default 1st IDE default System Management Menu System ManagementSystem Management Menu Exit Menu Upgrading the BiosPreparing for the Upgrade Exit Menu Obtaining the Upgrade Utility Performing the Upgrade Recovering the Bios Intel ISP1100 Internet Server Product Guide Configuration Software and Utilities Initial System Startup Resetting the SystemChecklist Press Running New Application Software After the System Has Been Running Correctly Monitoring Post More Problem Solving ProceduresPreparing the System for Diagnostic Testing Verifying Proper Operation of Key System Lights Specific Problems and Corrective Actions Power Light Does Not LightNo Characters Appear on Screen Characters Are Distorted or Incorrect System Cooling Fans Do Not Rotate ProperlyDiskette Drive Activity Light Does Not Light Hard Disk Drive Activity Light Does Not Light CD-ROM Drive Activity Light Does Not LightCannot Connect to a Server Problems with Application Software Problems with Network Error Codes and Error Messages Bootable CD-ROM Is Not DetectedError and Informational Messages Beeps Error message Error Messages Description OFF Board Parity Error Addr = Index Post Intel ISP1100 Internet Server Product Guide Index