Table 21. Boot Menu (continued)

Feature

After Power Failure

On Modem Ring

On LAN

On PME

IDE Drive Configuration

1st to 8-th Boot Devices

Options

Stays Off

Last State (default)

Power On

Stay Off (default)

Power On

Stay Off

Power On (default)

Stay Off (default)

Power On

Primary Master IDE

1st IDE (default)

2nd IDE

3rd IDE

4th IDE

Primary Slave IDE

2nd IDE (default)

Secondary Master IDE

3rd IDE (default)

Secondary Slave IDE

4th IDE (default)

ATAPI CD-ROM (default) Floppy

IDE-HDD

Intel UNDI, PXE-2.0 (LAN 1)

Intel UNDI, PXE-2.0 (LAN 2)

ARMD-FDD

SCSI

Disabled

Description

Determines the mode of operation if a power loss occurs. “Stays Off” keeps system off once power is restored. “Power On” boots the system after power is restored. “Last State” restores the system to the same state it was in before the power failed.

APM Mode only: Determines the action of the system when the system power is off and the modem is ringing.

APM Mode only: Determines the action of the system when a LAN wake up event occurs.

APM Mode only: Determines the action of the system when a PCI Power Management Enabled wake up event occurs.

Configures the peripheral devices. Configurable options for other IDE devices are similar to Primary Master IDE.

Configures the boot sequence from the available devices.

IDE-HDD = Hard disk drive.

Intel UNDI, PXE-2.0 = Network boot using PXE.

ARMD-FDD = ATAPI removable device-floppy disk drive.

SCSI = If a SCSI device is installed, it will appear as one of the possible boot devices with the name of device.

Configuration Software and Utilities

61

Page 61
Image 61
Intel ISP1100 Last State default, Power On default Stay Off default, 1st IDE default, 2nd IDE default, 3rd IDE default