Exit Menu
The menu bar is shown below.
|
|
Main | Advanced |
|
|
|
|
Security
Boot
System
Management
Exit
Table 23 shows the Exit menu. This menu exits the Setup program – saving, discarding, and loading default settings.
Table 23. Exit Menu
Feature | Options |
|
|
Exit Saving Changes | No options |
Exit Discarding | No options |
Changes |
|
Load Setup Defaults | No options |
Load Custom | No options |
Defaults |
|
Save Custom | No options |
Defaults |
|
Discard Changes | No options |
Description
Exits system Setup and saves your changes in CMOS.
Exits system setup without saving your changes in CMOS.
Loads setup defaults.
Loads custom defaults.
Save custom defaults.
Discards changes.
Upgrading the BIOS
Preparing for the Upgrade
Before you upgrade the BIOS, prepare for the upgrade by recording the current BIOS settings, obtaining the upgrade utility, and making a copy of the current BIOS.
Recording the Current BIOS Settings
1. Boot the computer and press <F2> when you see the message:
Press <F2> Key if you want to run SETUP
2. Write down the current settings in the BIOS Setup program.
NOTE
Do not skip step 2. You will need these settings to configure your computer at the end of the procedure.
Configuration Software and Utilities | 63 |
