1.Attach the female end of the appropriate AC power cord to the mating AC power receptacle on the server back panel.
2.Plug the male end of the AC power cord into the AC power source (wall outlet).
3.Open the bezel door (A) to access the Power switch (C) as follows:
a.Grasp the tab (B) at each end of the hinged bezel door.
b.Gently pull the tabs out and down to swing open the hinged bezel door.
4.Press the Power switch (C) to apply power to the server and notice that the green LED power indicator (D) is lit.
BA
B
DC
A | OMO9443 |
Figure 29. Powering Up the Server
52 | Intel ISP1100 Internet Server Product Guide |
