Slimline Optical Drive Carrier
The slimline optical drive carrier can be used with an optional optical drive. One slimline carrier is included with your server system; the optical drive must be purchased separately. You cannot install both an optical drive and a USB floppy drive.
The slimline optical drive carrier can be inserted or removed only when system power is turned off. Drives in the optical drive carrier are NOT hot swappable. For installation instructions on installing an optical drive, see “Installing or Removing a Slimline Optical Drive or Internal USB Floppy”.
To use one of the drives provided by Intel, use the following order codes:
•Slimline
•Slimline DVD/CDR Drive: AXXDVDCDR
Note: The Intel® Server System SR1500AL does not support all slimline optical drives. See “Server System References” for an Internet link to a list of supported hardware. Intel provides accessory kits for these drives.
Advanced Management Options
Intel® Remote Management Module
The Intel® Remote Management Module is available to provide advanced system management features.
For installation instructions on installing the Intel® Remote Management Module, see the instructions provided with the management module.
Rack-Mounted Systems
Your Intel® Server System SR1500AL can be mounted into a rack. Intel provides three options to mount this server into a rack. When installing the chassis into a rack, Intel recommends you install systems from the bottom of the rack to the top. In other words, install the first system in the rack into the bottom position of the rack, the second system in the second position from the bottom, and so on. Instructions for installing your chassis into a rack are included in the rail kit.
Intel® Server System SR1500AL User’s Guide | 19 |
