AF000355
Figure 35. Installing an Optical Drive Assembly into the Server System
14.Install the server system cover. For instructions, see “Installing the System Cover”.
15.(Optional) Install the front bezel. For instructions, see “Installing the Front Bezel”.
16.Plug all peripheral devices and the AC power cable(s) into the server.
Removing a Slimline Optical Drive or Internal USB Floppy
1.Observe the safety and ESD precautions at the beginning of this book. See “Safety Information”.
2.Power down the server and unplug all peripheral devices and the AC power cable(s).
3.Remove the front bezel if it is installed. For instructions, see “Removing the Front Bezel”.
4.Remove the server system cover. For instructions, see “Removing the System Cover”.
5.If removing an internal USB floppy drive, unplug it from the backplane.
6.Press the blue release lever (see letter “A”) to unlock the optical drive tray and remove the slimline optical drive tray assembly from the server system as shown in Figure 36.
44 | Intel® Server System SR1500AL User’s Guide |
